Table des Matières
Publicité
MODELES FROID SEUL-REVERSIBLES
COOLING ONLY-HEATPUMP MODELS
GC
D
A Tube "GAZ"
B Tube "LIQUIDE"
C Ecrou Flare
D Isolation des tubes
E Manchon isolant
Cintrage des tubes frigorifiques
Bending of cooling pipes
R ≥ 3,5 ∅
LIAISONS FRIGORIFIQUES
COOLING PIPES
B
A
C
E
ST
A "GAS" pipe
B "LIQUID" pipe
C Flare nut
D Pipe insulation
E Insulating sleeve
Dans le cas où le tube d'aspiration a une partie verticale excédant
8 m, il est IMPERATIF de procéder à la réalisation d'un siphon tous
les 3 m lorsque le Groupe de Condensation GC 30F / RCF est ins-
tallé au-dessus du Caisson de Traitement.
If the suction tube has a vertical section more than 8 m in length, it is
mandatory to provide a siphon every three meters when the condensing
unit GC 30F / RCF is installed above the processing unit
(interconnecting tubes with a bottle).
GC
The cassettes are designed to be connected with
outdoor units by means of flare cooling linkings (copper
pipes of cooling quality equiped at their ends with
flare nuts and insulated over their whole length).
The flare linkings are available at the factory in different
lengths: fixed lengths of 2.5 - 5 - 8 meters and varia-
bles lengths of 9 to 15 meters.
Couple de serrage - tigthening torque
Pipe Ø
1 Newton-mètre = 0,1 mètre-kilo
1 Newton-meter = 0,1 meter-kilo
Modèles / Models
K
* sans siphon / whitout siphon
18
TH2253 B
Torque
H. maxi. (m)
K 30F
K 45FA
Publicité
Table des Matières
