Frequently Asked Questions & Troubleshooting - INVENTOR P3F-WiFi25L Manuel D'utilisateur

10. FREQUENTLY ASKED QUESTIONS
& TROUBLESHOOTING
Are dehumidifiers
costly?
Where should the
dehumidifier be
placed ideally?
Can the filter be
replaced by another
HEPA type filter?
Which is the
appropriate room
humidity level?
Why does
condensation persist
on windows even
with dehumidifier's
use?
Why am I not able
to set the desired
humidity level by
use of the control
panel?
EN
For about the first month of use, the dehumidifier operates
intensively. This will gradually decrease within time, since
the dehumidifier will have been calibrated in its working
environment. Condensed households may sometime be
significantly expensive to heat. The use of a dehumidifier may
lower energy costs.
For optimal results, it is suggested that the dehumidifier is
placed in a central area. Doors within the household should be
open in order for the dehumidifier to enhance its operation.
The dehumidifier's filter cannot be replaced by any other type
of filter since it is specifically designed to operate with this unit.
Maintaining a proper home humidity level is essential
for your well-being and that of your household. Extreme
fluctuations cause adverse effects on both; low humidity may
cause respiratory problems and damage on wooden doors,
windows, and furniture, and make you vulnerable to electric
shocks due to increased static electricity. On the other hand,
high humidity may promote mold growth, serving as breeding
grounds for various bacteria and resulting in poor health and
also a damaged home. The ideal humidity levels fluctuate
between 45% to 55%.
When the desired humidity level is reached, there is a
possibility of partial humidity formation on windows. This
occurs due to the temperature variation between the
window and the external weather conditions. • Operating
the dehumidifier should significantly reduce condensation
formation on windows.
In order to access manually the humidity t / u you first need
to press the "Mode" button, and have no led indication on the
control panel, hence Cont or Comfort mode should be off. This
will allow you to manually change the desired humidity level.
15