Publicité
Les langues disponibles
Les langues disponibles
Operating instructions
en
The secuENTRY 5670 BRIDGE
gives you the ability to manage
secuENTRY cylinders from afar
using the secuENTRY KeyApp*
combined with an internet
connection. This includes
transmitting configuration files,
remote opening and creating
temporary
access codes.
* Please check at: www.burg.
biz/secuentry/description to
see whether your smartphone
is compatible with the app.
QR code
Each secuENTRY 5670 BRIDGE
has an enclosed QR code.
This QR code is needed for
perform firmware updates.
Attention! If the QR code is
lost, a firmware update of
the secuENTRY 5670 BRIDGE
is no longer possible. Please
take care to save the QR
code!
Tip: The QR code can also be
scanned in electronic form
or saved as a photo on a
secured data carrier.
English I 10
Initial setup
Connect the secuENTRY 5670
BRIDGE to a 5V USB power
adapter (not included) using
the enclosed 2m USB type C to
type A cable; the power adapter
should supply a minimum of 1A
to run the device.
1. Place the device no more
than two meters away from
your lock.
2. Plug the power adapter into
the socket.
3. The green LED on the
secuENTRY 5670 BRIDGE
will flash
every two seconds.
- If this does not happen, use
a thin object to hold the reset
button
, for five seconds
until the green LED flashes.
4. The flashing signifies that the
device is in learning mode.
First, you need to download the
secuENTRY KeyApp and create a
Burg-Wächter Bridge Cloud
account (please see the KeyApp
instructions in sections 1 and 2
for more information on this).
English I 11
Publicité
