Fora COMFORT check G40 Manuel De L'utilisateur page 6

Step 2: Setting the time format.
Press and release M to select the desired time format --- 12h or
24h. Press SET.
Step 3: Setting the time.
With the hour flashing, press
Press SET.
With the minute flashing, press
appears. Press SET.
Step 4: Deleting the memory.
With "dEL" and " " symbol on the display, press
M until the correct hour appears.
until the correct minute
M
M and select
"no" to keep the results in memory then press SET to skip.
To delete all the results, press
button to delete all memory. "OK" is displayed in themeter, which
indicates that all data stored is deleted.
SET
BATTERY
Step 5: Setting the reminder alarm.
You may set up any or all of the reminder alarms (1-4). The meter
displays "On" or "OFF" and "
set the first reminder alarm.
Press to select "On", then press SET to set the hour. When the
M
hour is flashing, press M
go to minutes, press M to add one minute. Hold
faster. Press SET to confirm and go to the next alarm setting.
SET
BATTERY
If you do not want to set an alarm, press SET to skip this step.
EN-4
and select "YES". Then press SET
M
CR2032
" , press to turn on or turn off to
M
to add an hour. Press SET to confirm and
M longer to add
CR2032