Fora COMFORT check G40 Manuel De L'utilisateur page 12

Note:
• Do not press the punctured site against the test strip or try to smear
the blood.
• If you do not apply a blood sample to the test strip within 3
minutes, the meter will automatically turn off. You must remove and
reinsert the test strip to start a new test.
• The confirmation window should be filled with blood before the
meter begins to count down. NEVER try to add more blood to the
test strip after the drop of blood has moved away. Discard the used
test strip and retest with a new one.
• If you have trouble filling the confirmation window, please contact
your health care professional or the local customer service for
assistance.
Step 4: Read your result.
The result of your blood glucose test will appear after the meter
counts down to 0. This blood glucose result will automatically be
stored in the memory.
Step 5: Eject the used test strip and remove the lancet.
To eject the test strip, point the strip at a disposal container for
sharp items. The meter will switch itself off automatically after
the test strip is ejected.
Step 6: Always follow the instructions in the lancing device
insert when removing the lancet.
WARNING!
The used lancet and test strip may be biohazards. Please discard
them carefully according to your local regulations.
EN-10