Aerus Pure&Dry Mode D'emploi page 11

WATER REMOVAL (CONTINUED)
WARNING: The Drainage Hose must be installed correctly as leakage can occur and/or water
Step Five:
Insert the other end of the Drainage Hose into
a floor drain, making sure that the hose is not
twisted, folded, kinked, looped, etc.
NOTE: In order to avoid water leakage, please ensure
the Drainage Hose is firmly connected and fully
inserted before use. Pitch Drainage Hose slightly
downward for proper water drainage.
LENGTH OF DRAINAGE HOSE
NOTE:
• The Drainage Hose should be as short as possible (the recommended length is less
than 0.6 meters)
• The difference in height between the end of the Drainage Hose and outfall must be
above 10 cm.
• The Drainage Hose should be unobstructed, otherwise it will not drain
water successfully
fills up the bucket instead of draining correctly.
Pry Up
Up
Before
After
Drainage Hose Connected
11