Daitsu XK46 Mode D'emploi page 45

6.5.3 Clock Timer
Unit On/Off at a certain time can be set through clock timer.
Set Timer:
(1) Press TIMER button to enter timer on setting and the "ON" icon is blinking;
(2) Press " " or "
button to finish setting;
(3) Before pressing ENTER/CANCEL button, pressing TIMER button can save
unit On time and then switch to unit Off time setting with "OFF" icon
blinking;
(4) Press " " or "
button to finish setting;
Cancel Timer:
Press TIMER button to enter timer setting; press TIMER button again to switch
to the setting of unit ON time or unit Off time; press ENTER/CANCEL button to
cancel timer.
Pressing " " or "
holding " " or "
Clock Timer setting is as shown in fig. 6.7 or 6.8:
" button to adjust unit On time. Press ENTER/CANCEL
" button to adjust unit Off time. Press ENTER/CANCEL
" button increases or decreases timer time by 1min;
" button for 5s increases or decreases timer time by 10min.
39
Wired Controller XK46