Daitsu XK46 Mode D'emploi page 31

Parameter Parameter
code name
One-button
viewing of
C18 indoor unit
project
number
Parameter
range
Operation method:
Enter viewing, short-press "MODE" button in "C18"
status to turn on the function of one-button viewing
indoor unit project code, and the wired controller will
enter the interface of viewing indoor unit project
code. Press "
unit.
Display method:
Temperature zone: displays number of the current
indoor unit
Timer zone: displays project number of indoor unit
Note:
1) After turning on the one-button viewing function,
each wired controller of the entire system will display
1-255:Proje
the project number of its controlling indoor unit on its
ct
timer zone. (The timer zone will display different
Number of
project numbers in turn with an interval of 3 seconds
online
if one wired controller is controlling multiple indoor
indoor
units.)
unit
2) Slave wired controller cannot view "C18".
Cancel method:
1) If user exits the "C18" interface manually, the
one-button viewing function will be immediately
turned off.
2) If system exits the "C18" interface due to no
action in 20 seconds, user has to press the
"ON/OFF" button under on/off status to cancel this
function.
3) After the one-button viewing function is turned on,
pressing the "ON/OFF" button of any wired controller
of the same system network under on/off status will
cancel this function.
25
Wired Controller XK46
Viewing method
" button to select the indoor
" or "