Daitsu XK46 Mode D'emploi page 28

Wired Controller XK46
Parameter Parameter
code name
Entrance of
C00 adjustable
parameter
View the
project
number of
C01 indoor unit
and locate
the faulted
indoor unit
View the
indoor unit
C03 quantity of
the system
network
Table 5.1 Parameters viewing list
Parameter
range
In "C00" status, Timer zone shows the current indoor
unit project number. When one wired controller is
--
controlling multiple indoor units, then only the
smallest project number will be displayed.
Operation method:
Enter viewing, press MODE button in "C01" status to
enter the interface of viewing indoor unit project
number. Press "
project number of indoor unit.
Display method:
Temperature zone: displays error codes of the
current indoor unit( The temperature zone will
display the error codes in turn with an interval of 3
1-255;
seconds if there are several malfunctions in one
Project
indoor unit.)
number of
Timer zone: displays present indoor unit project
online
number /C5 malfunction of project number conflict
indoor unit
Note:
1) If master indoor unit exists in current indoor unit
network, "MASTER" icon will be bright under "C01"
interface. After entering the interface of viewing
project number, "MASTER" icon will be bright only
when the project number of master indoor unit is
selected.
2) System will not exit "C01" viewing automatically.
User has to exit this interface manually.
Timer zone: display indoor unit quantity of the
1-80
system
22
Viewing method
" or " " button to select the