Parameter Setting - Daitsu XK46 Mode D'emploi

Wired Controller XK46
Parameter Parameter
code name
View the air
outlet
C20 temperature
of Fresh Air
Indoor Unit*
Note:
Under parameter viewing status, FAN, TIMER, SLEEP and SWING buttons
①
are invalid. Press "ON/OFF" button to go back to the home page, while not to
turn on/off the unit.
Under parameter viewing status, the signal from remote controller is invalid.
②

5.2.3 Parameter Setting

Unit parameters can be set in unit On or Off status.
(1) Long press FUNCTION button for 5s and the temperature zone displays "C00";
long press FUNCTION button for another 5s to enter the interface of setting
wired controller parameters. "P00" is displayed in temperature zone;
(2) Press " " or "
enter parameter setting. At that time, parameter value is blinking. Press "
" button to adjust the parameter value and press ENTER/CANCEL button to
"
Parameter
range
Operation method:
Enter viewing, short-press "MODE" button in "C20"
status to enter the interface of viewing air outlet
temperature of Fresh Air Indoor Unit. Press "
"
--
Display method:
Temperature zone: displays current indoor unit
project number
Timer zone: displays air outlet temperature of Fresh
Air Indoor Unit
Note: only applicable to Fresh Air Indoor Unit.
" button to select parameter code. Press MODE button to
Viewing method
" button to select the indoor unit.
26
" or
" or