Product Assembly - KitchenAid 7 QT Mode D'emploi

PRODUCT ASSEMBLY

1
Turn the Stand Mixer to "OFF/ 0" and
then unplug.
IMPORTANT: If the bowl is not securely snapped into place, it will be unstable and
wobble during use.
3
To attach the accessory: Slip the
accessory onto the shaft. Turn to hook it
over the pin on the shaft.
6
Pin
2
Locating pin
To attach the bowl: Fit the bowl
supports over locating pins and press
down on back of the bowl until bowl pin
snaps into spring latch.
4
To raise the bowl: Rotate the bowl
lift lever to the straight up position.
The bowl must always be in the raised
position when mixing.
Spring latch