Operating Elements - Metabo ELEKTRA BECKUM WIG 170 AC/DC Mode D'emploi

ENGLISH
4-step mode with HF-igni-
tion
Stick elevtrode welding and
Arc-Force function
Gas postflow time
Downslope time
Balance
Reduced cleaning action
Increased cleaning action
Mains voltage
S-Test
Excess temperature
Connector for remote con-
trol unit
Connector for TIG torch
Connector for TIG torch gas
hose
Connector for gas supply
Main switch
Information on rating plate:
1
2
3
7
1 Manufacturer
2 Machine designation
3 Serial number
4 Standard information – This
machine meets the requirements
of the standards mentioned
5 CE mark – This machine con-
forms to EU directives as per
declaration of conformity
6 Electrical performance data
7 Year of make
10

3. Operating Elements

13
8 Carrying strap/shoulder strap
Adjustable in length for carrying
9 Connector for remote control
unit
10 Connector for torch gas hose
11 Connector for TIG torch
pilot lead
12 Welding current connector
(+ pole)
4 5
13 Welding current connector
(- pole)
14 15 16
6
27
14 Welding current control
15 LED display
Displays the currently set weld-
ing current.
16 I1 welding current indicator
10
11
12
− by hand (shown in illustra-
tion)
− on the shoulder.
17 18 19 20 21 22
26 25
24
− LED illuminated:
welding current active.
17 I2 secondary current indicator
(4-step mode only)
− LED illuminated:
8
secondary current I2 is
active.
18 I2 secondary current control
19 Downslope time control
20 Equipment-on indicator
− LED illuminated:
Machine is turned on, no
faults detected.
− LED off:
9
Machine turned off or fault
present.
21 Excess temperature indicator
− LED illuminated:
Excess temperature fuse
tripped and control disa-
bled.
22 Gas postflow time control
23 S-Test indicator
− LED illuminated:
Machine ready to operate.
− LED off:
S-Test triggered, machine
not ready to operate.
24 Current type selector
25 Balance control
26 Frequency control
27 Operating mode selector
28
29
30
28 Master switch
23
Switches unit ON or OFF
29 Gas supply connector
30 Power supply cable
LED = Light-Emitting Diode, used as
indicator light.