After Use - Withings BPM Core Manuel D'utilisation

After use

Cleaning
- Do not use an alcoholic-base cleaning solution or solvent
to clean the device
- Clean the device with a soft, dry cloth
- If the cuff is dirty, clean it with a moistened cloth and
mild soap
- Do not flush the device and cuff with water
- Do not dismantle the device, disconnect the cuff, or try to
repair it by yourself. If the device is not working, contact
Withings support.
- Do not operate the device in extreme temperatures,
humidity, or direct sunshine
- Do not violently shake the unit or drop it on the floor
- Do not submerge the device or any of the components
in water
Storage
- Store the device and the components in a clean and safe
location
- If storage conditions are different from the usage
conditions indicated in this document, please wait 30
minutes before taking a measurement.
Maintenance
If you cannot fix a problem using the troubleshooting
instructions, please request service from your dealer or
Withings support. The manufacturer will make available
on requested circuit diagrams, component part lists,
descriptions, calibration instructions, or other information
that will assist staff or authorized representatives with
repair.
It is generally recommended to have the device inspected
every 2 years, to ensure proper functioning and accuracy.
Do not use the device while it is under maintenance.
18