Yamaha YAS-306 Guide De Démarrage Rapide page 22

Masquer les pouces Voir aussi pour YAS-306:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3
Teach the unit the TV remote control's "Mute" command.
3-1 Press the
key on the unit.
CONNECT
Indicators
3-2 Point the TV's remote control at the remote control sensor on the unit, hold
down the mute key for at least 1 second, and then release it for at least 1
second. Perform this operation twice.
The position of the remote control sensor varies depending upon the installation of
the unit (p.10).
Approx. 30 cm
Hold down
(for at least 1 second)
(for at least 1 second)
Bleep/
Result
buzzer
Successfully
Once
learned
Failed to learn
Repeat from Step
Twice
3-1.
Troubleshooting the unit's failure to learn commands
Is the TV turned off?
Is direct sunlight or fluorescent light striking the unit and interfering with operation?
Are you using the TV's remote control for Steps 3 though 6? (The unit's remote control is not
used.)
Are you using the remote control within the range indicated above?
Are you holding down keys on the TV's remote control for at least 1 second, and then releasing
them for at least 1 second?
If the unit fails to learn commands even after checking all of the above, hold down and release the
key on the TV's remote control three times.
SETTINGS ➤ Using the TV's remote control to adjust the unit's volume
22
En
TV's remote control
Release
Hold down
(for at least 1 second)
Indicators
Glows
Flash
4
Teach the unit the TV remote control's "Volume (–)" command.
4-1 Press the
CONNECT
Indicators
4-2 Point the TV's remote control at the remote control sensor on the unit, hold
down the volume (–) key for at least 1 second, and then release it for at least
1 second. Perform this operation twice.
Result
Successfully
learned
Failed to learn
Repeat from Step
4-1.
5
Teach the unit the TV remote control's "Volume (+)" command.
Release
5-1 Press the
CONNECT
Indicators
5-2 Point the TV's remote control at the remote control sensor on the unit, hold
down the volume (+) key for at least 1 second, and then release it for at least
1 second. Perform this operation twice.
Result
Successfully
learned
Failed to learn
Repeat from Step
5-1.
key on the unit.
Bleep/
Indicators
buzzer
Once
Glows
Twice
Flash
key on the unit.
Bleep/
Indicators
buzzer
Once
Glows
Twice
Flash

Publicité

Table des Matières
loading

Table des Matières