OPERATING INSTRUCTIONS
In AUTO mode, the Party function is used to temporarily exclude the set program by
manually entering a set point for a different temperature, for a period of between 1 and 23
hours inclusive. This function can be used, for example, to extend the comfort period
during a dinner, a party, etc.
When the function is active it is still possible to modify the value of the set point and period
of activation, in the same way as described above.
The function can also be activated when the timer-thermostat in manual mode (MAN).
The Party function remains active until the set period elapses.
The hours count is decremented during operation.
Press key
; for deactivation in advance: on deactivation, the timer-thermostat returns
to the starting operating mode.
Party function
Press key
, to activate the function, the symbol
appears on the display while the value of the set point
active at that time starts blinking. Use keys
the new value of the temperature set point.
Use keys
to set the number of hours of activation,
that will be displayed on the display.
Press key
, or wait 5 seconds, to confirm the setting
made.
43
E
N
G
to set
L
I
S
H