Temporary Forcing Of The Temperature - Gewiss GW 10 841 Mode D'emploi

OPERATING INSTRUCTIONS
The time is decreased/increased with steps of 15 minutes each time keys
pressed, so it is possible to define up to 4 programming periods for each hour.
Proceed in the same way as described above until the profile is complete.
Copying the Program
If it is required to copy the program to the next day, confirm the programming performed
by pressing key within 30 seconds.
Press key within 30 seconds to confirm the programming without copying; an automa-
tic move is made to the programming for the next day.
Press key , at the end of weekly programming to return to normal operations.
To activate the program select AUTO operating mode by pressing key
symbol appears on the display.

Temporary forcing of the temperature

In AUTO operating mode it is possible to temporarily force the active temperature set point
using keys to set the required value. Confirm the value by pressing key
ting 5 seconds.
Personalizing the daily program
Activation of the forcing is signaled on the display by the
blinking of the AUTO symbol.
The forcing remains active until the first variation of the
profile present in the programz.
42
, are
until the AUTO
or wai-