Parameter Setting - Gewiss GW 10 841 Mode D'emploi

OPERATING INSTRUCTIONS
Press the key once to set the parameters.
The SET symbol and the clock appear on the display, while the bar of the day of the week
starts blinking.
At this point it is possible to modify, in sequence:
- day of the week,
- hours,
- minutes,
- temperature unit of measure,
- set point T1,
- set point T2,
- set point T3,
- antifreeze temperature value,
- self-learning activation,
- differential regulation value.
Alternatively it is possible to scroll the sequence pressing key
be modified is selected. The value of each parameter is confirmed by pressing key
setting phase is exited by pressing key
st key entry.

Parameter setting

again or, automatically, 30 seconds after the la-
Setting the day of the week
When the day of the week bar blinks, select the current
day with keys
(Monday=1, Tuesday=2 ... Sunday=7).
Press key within 30 seconds to confirm the set value.
37
Temperatures used in the
heating or air conditioning
program,differentiated
by type of operation.
, until the parameter to
.
E
N
G
L
I
S
H
. The