Table Des Matières; Data; Safety - Ferm BCM1020 Traduction De La Notice Originale

BATTERY CHARGER
Thank you for buying this ferm product
By doing so you now have an excellent product,
delivered by one of Europe's leading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive Warranty.
We hope you will enjoy using this product for
many years to come.
Carefully read the instructions before
you use the Battery charger!
Know you apparatus
Before you use theBattery charger, carefully
read the instructions, especially the safety rules.
Observe the instructions for maintenance to
ensure your apparatus always operates properly.
Before attempting to operate the apparatus,
familiarise yourself with the controls and make
sure you know how to stop it quickly in an
emergency. Save this user's manual and the other
documents supplied with this apparatus for future
reference.
Intended use
This BCM1020 is a car charger with impulse
trickle charge (Chip Software) suitable for
charging and trickle charging the following 6 V or
12 V rechargeable lead batteries with electrolyte
solution, AMG batteries, lead-acid batteries, deep
cycle (marine batteries), or gel batteries:
• For automotive and motorcycle batteries with
12 V / 6 V and 8-180 Ah capacity.
You can also regenerate drained batteries
(depending on battery type). The car charger
features a protective circuit against sparking and
overheating. Any improper or incorrect use will
void the warranty. The manufacturer is not liable
for damage caused by improper use. The device
is not intended for commercial use.
Note: The car charger is not suitable for charging
electric vehicles with built-in rechargeable battery.
Contents
1. Data
2. Safety
3. Installation
4. Maintenance

1. DATA

Technical specifications
Input voltage
Rated output voltage
Charging current
Battery type with
This apparatus has a overload protection by
means of a thermal fuse which will switch on as
soon as the electricity is switched off.
Parts description
1. Digital display button
2. Battery type button
3. Charger start button
4. Fuse with cover
5. "+" Terminal connection cable (red)
6. "-" Terminal clamp (black)
7. "+" Terminal clamp (red)
8. "-" Terminal connection cable (black)
9. Mains cable
10. Digital display
Packaging contents
The following is supplied with your
Battery charger:
1 Battery charger/Jump starter
1 Set battery clamps
1 Manual
1 Warranty card

2. SAFETY

Explanation of symbols
Read instructions carefully
In accordance with essential applicable
safety standards of European directives
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-obser-
vance of the instructions in this manual.
230 V ~ 50 Hz
6V/12V
2 A, 6 A, 12 A
12V/6V and 8-180 Ah capacity
3