Publicité
Les langues disponibles
Les langues disponibles
2
Single action connectors are located on both sides of the
arm (see picture). Connect high pressure hose (delivery)
to the "A" port and low pressure hose (return) to the "B"
port.
2. DOUBLE ACTION OPERATION
Wrench fork and others controls
WARNING
A
LWAYS SET THE MARKED
. I
POSITION
F THE MARKED
,
IN VERTICAL POSITION
ACTION DOES NOT FUNCTION EFFICIENTLY
Switching the attachment hydraulic circuit.
Check the marked position on the shift valve (1).
Turn the valve with a wrench and set the marked (–) in
horizontal position, if necessary.
V
ERTICAL ROLLER WHEEL
Activation door A:
Activation door B:
H
ORIZONTAL ROLLER WHEEL
Activation door A:
Activation door B:
Single action connectors are located on both sides of the
arm (see picture).
OPERATION
CAUTION
(–)
IN HORIZONTAL
( I )
OF THE VALVE IS SET
B
THE
PORT OF THE DOUBLE
.
push forward the roller (2) to
pressurise door A.
push back the roller (2) to
pressurise door B.
push to left the roller (2) to
pressurise door A.
push to right the roller (2) to
pressurise door B.
CAUTION
"B" Port (PF 1 / 2)
(return)
(opposite side)
Shift Valve
"B" Port (PF 1 / 2)
(opposite side)
2 – 4
EN
"A" Port
(PF 1 / 2)
(delivery)
Set the mark
(—) in horizontal
position
"A" Port
(PF 1 / 2)
Publicité
