Publicité
Les langues disponibles
Les langues disponibles
2
2 – 2 CONTROL INSTRUMENTS (19VXT)
(1) Roller wheel for proportional auxiliaries control
(2) Auxiliaries level hold button
(1) V
ERICAL ROLLER WHEEL FOR PROPORTIONAL AUXILIARIES CONTROL
The vertical roller wheel is placed on the top of the right operating lever. When the roller is pushed
FORWARD the pressurised oil is supplied, proportionately to the stroke, to the "A" door on the left side of the
arm. When the roller is pushed BACK the pressurised oil is supplied, proportionately to the stroke, to the "B"
door on the right side of the arm.
(1
) H
A
ORIZONTAL ROLLER WHEEL FOR PROPORTIONAL AUXILIARIES CONTROL
The horizontal roller wheel is placed on the top of the right operating lever. When the roller is pushed to
LEFT the pressurised oil is supplied, proportionately to the stroke, to the "A" door on the left side of the arm.
When the roller is pushed to RIGHT the pressurised oil is supplied, proportionately to the stroke, to the "B"
door on the right side of the arm.
(2) A
UXILIARIES LEVEL HOLD BUTTON
The hold button is placed on the front part of the right operating lever. Pressing the button stops the flow,
determined by the roller wheel. To restart press the button again.
(3) H
ORN
The horn button is placed on the top of the left operating lever.
(4) A
RM ROTATION SELECTION BUTTON
Arm rotation to the right:
Arm rotation to the left:
OPERATION
2
3
4
Press the button and move the lever to the right.
Press the button and move the lever to the left
1
(3) Acoustic signal
(4) Arm rotation selection button
2 – 2
EN
Publicité
