Operation; Switching On Your Unit; Adjusting The Temperature; Noises Inside The Unit - Sonnen DF1-06 Mode D'emploi

Operation

Switching On Your Unit

1. Connect the mains cable to the mains socket. The internal
temperature of your unit is controlled by a thermostat.
There are six settings, of which position 5 is the coldest
and position 0 turns the unit off.
2. Adjust the thermostat control dial to the desired position,
bear in mind that the higher the number, the lower the
temperature. Position 3 recommended setting when operating
at normal room temperature (between 16°C and 38°C).
3. The unit may not operate at the correct temperature if it is
in a particularly hot or a particularly cold room, or if you
open the door often.
4. To ensure that the unit is cool enough to sufficiently chill
your food, wait 24 hours before filling it with food.

Adjusting the Temperature

The internal temperature of the unit is controlled by a thermostat. The recommended position is between
1 to 3 for colder working environments (i.e. during winter) and between 4 to 5 for hotter environments.
Please adjust according to the environment.

Noises Inside the Unit!

You may notice that your unit makes some unusual noises. Most of these are perfectly normal, but you
should be aware of them!
These noises are caused by the circulation of the refrigerant liquid in the cooling system. It has become
more pronounced since the introduction of CFC free gases. This is not a fault and will not affect the
performance of your unit. This is the compressor motor working, as it pumps the refrigerant around the
system.
33