Installation; Reversing The Door Swing - Sonnen DF1-06 Mode D'emploi

INSTALLATION

Reversing the Door Swing

Tools required: Phillips style screwdriver / Flat bladed screwdriver / Hexagonal spanner
 Ensure the unit is unplugged and empty.
 Adjust the two levelling feet to their highest position.
 To take the door off it is necessary to tilt the unit backwards. You should rest the
unit on something solid so that it will not slip during the door reversing process.
 All parts removed must be saved to do the reinstallation of the door.
 Do not lay the unit flat as this may damage the coolant system.
 We recommend that 2 people handle the unit during assembly.
1. Tilt the unit slightly towards the rear
and prop it securely. Two people are
required to tilt the unit during the door
reversal process.
2. Remove the top right hinge cover.
27