Sonnen DF1-06 Mode D'emploi page 37

INSTALLATION
7. Unscrew and remove the bottom hinge
pin, turn the bracket over and replace it.
8. Refit the bracket fitting the bottom
hinge pin. Replace both adjustable
feet.
9. Place the door back on. Ensure the door
is aligned horizontally and vertically so
that the seals are closed on all sides
before finally tightening the top hinge.
10. Insert the hinge bracket and screw it to
the top of the unit.
11. Use a spanner to tighten it if necessary.
Screw
29
Unscrew
Screw