Bluetooth Mode - Grundig M 1000 BT Mode D'emploi

BLUETOOTH MODE

Compatible with the following
devices
Your M 1000 can be connected to any com -
mercially available Bluetooth-compatible de-
vices that comply with the A2DP standard. This
includes smartphones, laptops and tablet PCs,
for example.
Selecting the Bluetooth input source
1 Select the Bluetooth input source by pressing
» « on the device or »SOURCE« on the
remote control.
– Display: »BT«.
Finding and connecting a Bluetooth
auxiliary device
1
Activate the Bluetooth function on the Blue-
tooth auxiliary device.
2
Start the search function on the Bluetooth
auxiliary device.
– After a short time, your Grundig Connected
Hifi System will be displayed on the Blueo -
tooth auxiliary device.
3
Select the Grundig Connected Hifi System on
the Bluetooth auxiliary device and connect to
it.
4
When the Bluetooth auxiliary device is con-
nected to your device, »BT« is displayed on
the Grundig Connected Hifi System.
Note:
Your M 1000 can only receive and play
7
the audio signal from one Bluetooth device;
however, up to 8 Bluetooth auxiliary de-
vices can be logged on.
Activating a Bluetooth auxiliary
device that is logged on
Notes:
You only have to log Bluetooth auxiliary
7
devices on once.
When the Bluetooth auxiliary device leaves
7
and then moves back into signal range of
the Grundig Connected Hifi System, the
auxiliary device logs on automatically.
32
ENGLISH
---------------------------------------------------------------------------------------------------
The M 1000 automatically connects to the
7
last Bluetooth auxiliary device that was
logged on.
If the Bluetooth auxiliary device is not rec-
7
ognised, it has to be activated again via its
own menu.
Playback from the Bluetooth
auxiliary device
1 Start playback on the Bluetooth auxiliary
device.
2
Set the preferred volume with the control knob
on the hi-fi system or press
remote control
3
End playback on the Bluetooth auxiliary de-
vice.
Notes:
Various functions can also be controlled on
7
the M 1000.
Press » e
press » e
press »
track and »
Note that the data transmission range can
7
be as much as 9 m, depending on the Blue-
tooth device that is used and the structure
of the building.
Logging out the Bluetooth auxiliary
device
1 Log out the Bluetooth device.
– The display changes to »NO BT«.
Logging the Bluetooth device back
on
1 If you move out of data transmission range or
switch off Bluetooth mode, the Bluetooth aux-
iliary device is logged out.
2
To log back on, select your Grundig Conk -
nected Hifi System again on the Bluetooth
auxiliary device.
Note:
If it is not possible to connect to a Bluetooth
7
auxiliary device that was registered previ-
ously, remove your Grundig Connected Hifi
System from the Bluetooth auxiliary device's
device list and repeat the search and con-
nection procedure.
»– VOL
II« to pause playback,
II« again to resume playback;
« to select the previous
3
« for the next track.
4
+« on the