Removing The Ground Coffee - LaCimbali ELECTIVE Utilisation Et Installation

11. Removing the ground coffee

The measure grinder can be set with 2 different drawing modes:
"Manual" operation
1 1
lace the coffee machine s filter-holder on to the fork 7).
"Pre-selection" operation
1
The icon chosen will ash on the display
to show the pre-selection:
In this example, the single dose is pre-
selected. The icons corresponding to
the other doses are not lit.
ote t e grinding c cle can be stopped be ore t e set grinding time b pressing t e ouc
Lack of coffee (where applicable)
1 1
02_UNICO_P285_1935.indd 11
10
7
1 2
lace the coffee machine s filter-holder on to the fork 7). The measure grinder
operates for the set measure-time and the ground coffee descends from the
duct (10).
Grinding is stopped automatically.
It is possible to choose a different dose by selecting the relative icon on the
display before positioning the filter-holder
Lack of coffee beans
in the hopper is
communicated with
the dedicated pop-
up.
2 2
Choose the pre-selected dose (
by pressing the icon on the touch screen.
The grinder/dispenser is active for the dose time set
and the ground coffee falls from the duct (10).
Grinding will stop automatically.
Note. Grinding occurs continuously whilst the
relative icon is pressed
activation time indicated on the data plate).
7
1 2
11 EN
, or
(for the maximum
10
creen.
By pressing the
display, the warning
is minimised
and it is still possible
to dispense a few
more doses.
)
27/08/2019 15:47:40