Screensaver - LaCimbali ELECTIVE Utilisation Et Installation

Screensaver

1
Push the icon.
Screensaver - Logo
The standard Cimbali logos are shown on the grinder/dispenser display after a
period of inactivity which can be defined on the
The grinder/dispenser is supplied with the logos shown in the pictures:
The user can add further (1 or 2) personalised logos to the display.
To create a customised logo, proceed as follows:
1
Using any graphics program (e.g.
aint , create a file that meets certain
characteristics; the prerequisites for a
bitmap image to be used as a custom
logo are:
CustImg1.bmp
• width equal to 480
pixels;
• length equal to
272 pixels.
• - b i t
colour.
Copy the CustImg1.bmp and or
CustImg2.bmp files that you want to
display onto a USB pen drive.
4
Once loading is complete, remove the USB pen drive from the grinder/dispenser.
Now the customised logo will appear according to the settings selected in the dedicated menu.
Note: if the screensaver is activated, the logos can be seen immediately, without waiting for the period of inactivity, by
pressing the brand name on the display:
02_UNICO_P285_1935.indd 16
2
2
Insert the USB pen drive in the port
on the grinder/dispenser:
b m p
3
elect the name on the display and wait for the file to load
creensaver menu
Standard
16 EN
green background = activation;
time after which the screensaver
images will be displayed;
length of time the images will be
displayed;
save changes.
The name of the file to be uploaded will
appear on the display:
CustImg1.bmp
CustImg2.bmp
27/08/2019 15:47:46