Troubleshooting - Roca MULTICLIN ADVANCE RF Manuel De L'utilisateur

14
Issue
No working
Low water flow or pressure
Nozzles do not function properly
Nozzles fail to retract
Washing feature does not work
or fails to spray
Product shuts off during use
Seat not heated
Water not heated
Dryer not working
Other

TROUBLESHOOTING

Possible
1.Disconnected/ no power supply
2.No electrical power supply
3.Product is power off.
1. Clogged filter
2. twisted hose
3. Nozzle cap is stuck
1. Nozzles are dirty
2. Clogged filter
3. Water pressure is too low
1. Nozzles are dirty
1. User not properly seated
1. Washing time exceeded 5
minutes
2. Power failure
1. Seat temperature set to off
1. Water temperature set to off
1. Dryer only operates when
activated
Please contact with dealer or call at 902400423 (Only in Spain )
Solution
1.Connect the product
2.Check there's a 230V~signal
with another product
(such us hairdryer)
3.Push the power button
(on/off auxiliary control).
1. Clean water filter
(See page12)
2. Straighten the hose
3. Clean nozzle cap
1. Clean the nozzles(See page12)
2. Clean the filters(See page12)
3. Adjust water pressure
1. Clean the nozzles
(See page 12)
1. Adjust your sitting position
1. Repeat cleaning function
2. Check power and / or unplug
the cord to reset
1. Reset heated seat temperature
(See page 10)
1.Reset heated seat temperature
(See page 9)
1. Sit on product to operate dryer
(See page 10)