Radio Settings - Renault Radio Connect R&Go Mode D'emploi

LISTENING TO THE RADIO

Radio settings

Display the settings menu by pressing
the 9 button on the audio system panel
then, depending on the audio system
panel, select "Radio" by turning and
pressing the 5 knob or select and press
the 14 buttons, then confirm by press-
ing the 25 button. The available func-
tions are as follows:
– «TA»;
– «DR Interrupt...»;
– «Ref. FM List»;
– «Ref. DR List».
«TA»
When this feature is activated, your
audio system allows traffic bulletins to
play automatically as new reports are
issued by some FM or DR radio sta-
tions.
Note: This feature is not available for
the AM waveband.
Select the information station and then
choose whether you want another lis-
tening source.
GB.18
(2/4)
Traffic information is broadcast au-
tomatically and has priority over the
source being listened to at the time.
To activate or deactivate this feature,
refer to the «Radio settings» paragraph
under «System settings».
«DR Interrupt...» (newscasts)
When this function is activated, it is
possible to automatically listen to news
as it is broadcast by certain «FM» or
«DR» radio stations.
If you then select other sources, when
a broadcast of the selected programme
type is made, it will interrupt the other
sources.
To activate or deactivate this function,
please refer to the information on «DR
Interrupt...» in the «System settings»
section.
«Ref. FM List»
This feature allows you to perform an
update of all FM stations in your area.
Display the settings menu by pressing
the 9 button on the audio system panel
then, depending on the audio system
panel, select "Radio" by turning and
pressing the 5 knob or select by press-
ing the 14 buttons, then confirm by
pressing the 25 button.
Depending on the audio system panel,
select "Ref. FM List" by turning and
pressing the 5 knob or select by press-
ing the 14 buttons and confirm by
pressing the 25 button.
The automatic update of the FM sta-
tions in the area starts. The message
"Updating FM List" is displayed on the
screen.
With the automatic frequency scan fin-
ished, the message "FM List updated"
is displayed on the screen.
Note: if another source is selected, the
FM radio list update continues in the
background.