Adjusting Minimum Gas Supply - Whirlpool AKR 313 Manuel D'instructions

4.2 Adjusting minimum gas supply

To ensure minimum gas supply is correctly
adjusted, remove the knob and proceed as
follows:
• Tighten screw to reduce flame height (-).
• Loosen screw to increase flame height (+).
• The adjustment must be performed
with minimum gas supply setting
(small flame).
• The primary air of the burners does not
need to be adjusted.
Manual W10777749.indd 50 Manual W10777749.indd 50
• Light up the burners and turn the knobs
from max position
flame stability.
Upon completion of the adjustment, reseal
using wax or an equivalent material.
50
to min to check
F
14/07/15 10:25 14/07/15 10:25