Start Playback - Philips DVDR610 Guide D'utilisation Rapide

... cont.
3 4
Start manual recording
4
1
Insert a recordable DVD+R(W) with the label side facing up.
2
Press TUNER on the remote control to see the TV
programmes, then press 3 4 to select the programme
number you wish to record.
➜
If you wish to record from additional devices (e.g. Video
Cassette Recorder), press 3 4 on the remote control to select the
correspond external input channel.
For example, select { EXT2 } if you have connected the VCR to
EXT2 AUX-I/O scart socket at the back of the DVD recorder.
3
Press REC MODE to select a desired recording mode. It
defines the picture quality and the maximum recording time
for a disc.
Record Picture Quality
Mode
M1
High quality (HQ)
M2 DVD quality-Standard Play (SP)
M2x
DVD quality-Standard Play Plus (SP+)
M3
S-VHS quality-Long Play (LP)
M4 VHS quality-Extended Play (EP)
M6
VHS quality-Super Long Play (SLP)
M8
VHS quality-Super Extended Play (SEP)
Note: {M1} record mode only available for DVDR615 and DVDR616.
{M2x} is the factory default setting for recording mode.
4
Press REC 0 to start recording.
G
If required, you can press REC 0 twice to start a
30-minute recording. Each time you press REC 0 button,
you will add 30 minutes to the recording time.
5
During recording, you may press PAUSE ; to pause the
recording and press REC 0 to continue.
6
To stop the recording, press STOP 9.
➜
Wait until the message disappears from the display panel before
you remove the disc.
CH+
CH-
Maximum Recording
Time per Disc
1 hour
2 hours
2.5 hours
3 hours
4 hours
6 hours
8 hours
Detailed playback features and additional functions are described in the
2
ALL ALL
1 2 3 4

Start Playback

5
1
Insert a disc with the label side facing up.
2
Playback will start automatically.
➜
If a dialogue appears on the TV showing { Do you want to
access the disc content? }, press 3 4 to select { Yes } to show the
disc content
➜
If a disc menu appears, press 1 2 3 4 to navigate within the
menu, highlight a title and press OK or PLAY 2 to start playback.
NO SOUND! Connect the AUDIO L/R (red/white) sockets at
the back of the DVD recorder to the correspond AUDIO input
sockets on a TV set, stereo system or receiver. Turn on the
connected system and select the appropriate channel.
3
To stop playback, press STOP 9.
To watch the TV programmes
1
Press TUNER on the remote control, then press 3 4 to
select the programme number.
To play a DVD+R on other DVD players, you
must finalise it first
1
Press EDIT on the remote control.
2
Press 3 4 to select { Finalise } in the menu, thenpress OK
to start finalising the DVD+R.
Once a DVD+R is finalised, no further recording or
editing is possible. Unfinalising a DVD+R is not
possible.
accompanying user manual.
CH+
EDIT
CH-
SUPER VIDEO
OK
PLAY
2