English
12
-
If they are not aligned, push down the lever until it is in contact with the base of the brew group
(Fig. 17).
2 Make sure that the yellow locking hook on the other side of the brew group is in the correct
position.
-
To position the hook correctly, push it upwards until it is in uppermost position (Fig. 18).
3 Place back the coffee residues drawer.
4 Slide the brew group back into the machine along the guiding rails on the sides until it locks into
position with a click. Do not press the PUSH button.
5 Close the service door and then place back the drip tray with coffee grounds container.
Cleaning and maintenance
Regular cleaning and maintenance keeps your machine in top condition and ensures good-tasting
coffee for a long time, a steady coffee flow and a perfect milk froth.
Consult the table on when and how to clean all detachable parts of the machine. You can find more
detailed information and video instructions on www.saeco.com/care.
Cleaning table
Cleaning table
Part description
Brew group
Milk carafe
Drip tray
Coffee grounds
container
Water tank
When to clean
Weekly
Depending on the
type of usage
Monthly
After every use
Daily
Weekly
Monthly
As soon as the red
'drip tray full' indicator
pops up through the
drip tray.
Weekly
Weekly
How to clean
Remove the brew group and clean it under the tap.
Lubricate the brew group.
Clean the brew group with the coffee oil remover
tablets.
Perform the QUICK CARAFE CLEAN as indicated on
the machine after preparing a milk-based beverage.
Clean the milk carafe thoroughly. You can also select
the QUICK CLEAN function via menu, if not already
performed after preparing a milk-based beverage.
Disassemble the milk carafe and clean all parts under
the tap.
Use Saeco milk circuit cleaner CA6705 for this
cleaning cycle.
Empty the drip tray and clean it under the tap.
Empty the coffee grounds container and clean it
under the tap. Make sure the machine is switched on
while you empty and clean the coffee grounds
container.
Clean it under the tap.