Axis Communications Q8665–LE PTZ Network Camera Guide D'installation page 33

1
See the table for cable positions.
Left illuminator
Position in
Reference on
illustration the board
4
WH
3 BK
2
A1
1
B1
Adjust the IR Illuminator Power
Important
Do not change the position of the switch-on threshold regulator.
• To adjust the power of the IR illuminator, loosen the hermetic plug.
- Adjust the IR power control clockwise to increase the power.
- Adjust the IR power control counter-clockwise to decrease the power.
AXIS Q8665–LE PTZ Network Camera
1
Cable color
White or Yellow
Black
Green or Blue
Red
33
Right illuminator
Reference on Cable color
the board
WH White or Yellow
BK Black
A2 Green or Blue
B2 Red