Cleaning, Care And Storage - Enviracaire HCL-725E Mode D'emploi

Emptying the main and secondary water tanks before changing
location or storing
If you wish to move the air conditioner or do not wish to use it for a
longer period (a week or more), you must empty the main and
secondary water tanks completely.
1. Empty the main water tank as described under „Emptying the
water out of the main water tank".
2. Take the water tube (7) of the secondary water tank completely
off its holder at the back of the air conditioner. Put the tube into
an external container. Take the cap of the water tube (7) off and
allow all the water to run out into the external container. Make
sure that the tube (7) is securely fixed in the container so that no
water can spill. Water can damage objects and floor coverings
and lead to an electric shock (Fig. 8).
3. As soon as all the water has run out of the water tank, fit the cap
back tightly onto the tube (7) and put the tube back onto its
holder at the back of the air conditioner. Empty the external
container.
4. Switch the air conditioner back on as described in the
„User's manual".
MOUNTING THE WASTE AIR TUBE
(Operating mode COOL)
The air conditioner provides two ways of mounting the waste air tube.
Pull the waste air tube only as far out as you need, for example, to
pass it through a window to outdoors. For the best performance, the
length of the tube should be kept to a minimum. IMPORTANT: Do not
stretch or buckle the waste air tube (Fig. 1).
1. Fix the waste air tube (12) to the attachment provided for the air
discharge vent (14) at the back of the air conditioner. Make sure
that the waste air tube is fitted properly.
2. Fix the reducing duct (13) firmly to the other end of the waste air
tube (12).
3. Put the waste air tube (12) with the fitted reducing duct (13)
through an open window to outdoors and secure it with the
enclosed loop.
4. Alternatively, you can use the window set. Cut an opening of
138mm diameter into a window pane with normal (Fig. 2) or
double-glazing (Fig. 3) and mount the set (Fig. 4). Push the waste
air tube (12) without the reducing duct (13) through the set to
outdoors.
5. If you do not wish to use the air conditioner, pull the waste air
tube back into the room.
INSTRUCTIONS
Operating mode COOL
1. Plug the air conditioner into a power socket. Put the waste air
tube to outdoors.
2. Turn the thermostat knob (18) in a clockwise direction to the
highest position.
3. Press the power key (15) to switch the air conditioner on.
The control lamp of the last setting lights up
4. Press the operating mode key (16) to COOL. The control lamp
(19) lights up.
5. Press the fan speed key (17) to the HIGH position.
The control lamp (20) lights up.
6. As soon as the desired room temperature is reached, press the
fan speed key (17) to the LOW position. The control lamp (21)
lights up.
7. Turn the thermostat knob (18) in an anti-clockwise direction until
the compressor switches off. The thermostat maintains the room
temperature by switching the air conditioner on and off
automatically.
8. When you want to switch the air conditioner off, press the power
key (15) to the OFF position.
ENGLISH
Operating mode DRY
1. Plug the air conditioner into a power socket. Remove the waste
air tube from the air conditioner.
2. Press the power key (15), to switch the air conditioner on.
The control lamps of the last setting light up.
3. Press the operating mode key (16) to DRY. The control lamp (22)
lights up. The air conditioner does not cool in this operating
mode.
4. When you want to switch the air conditioner off, press the power
key (15) to the OFF position.
Adjusting the air discharge vent
Take hold of a slat of the air discharge vent (3) on the outer sides with
both hands and adjust the air discharge vent (3) to the desired posi-
tion (Fig. 6).
Water tank control lamp
When the water tank is full, the control lamp (22) lights up. Follow the
instructions as described in "Emptying the water".

CLEANING, CARE AND STORAGE

We recommend that you clean the air conditioner frequently.
So as not to interfere with the functioning of the air conditioner,
please follow the instructions for cleaning, care and storage.
Weekly cleaning
1. Before you start with the cleaning, press the power key (15) to
the OFF position and unplug the air conditioner.
2. To clean the two air filters (5), open the air intake vent (4) and
take the air filters out of their holders (Fig. 9 + 10). Clean the
air filters carefully with the brush attachment of your vacuum
cleaner. If the filters are very soiled, clean them carefully in warm
water (about 40°C) and household washing-up liquid. Rinse the
air filters thoroughly and allow them to dry completely. Do not dry
them in the sun.
3. Put the air filters (5) back into their holders and close the air
intake vent (4).
4. Wipe all the outer surfaces of the air conditioner with a soft,
damp cloth. Do not use petroleum, paint thinners or any other
chemicals to clean the air conditioner.
5. Restart the air conditioner as described in the „User's manual".
Care and storage
1. If you do not wish to use the air conditioner for a longer period
(a week or more), please clean the air conditioner as described
in „Weekly cleaning".
2. Empty all the water out of the main and secondary water tanks.
3. Allow the air conditioner and all its components to dry completely.
4. The air conditioner must not be stored with soiled air filters, or as
long as there is water in the water tanks.
5. Always store the air conditioner in an upright position in a cool,
dry place.
6