Programming Instructions - Fracarro SIG7730 Instructions D'emploi

The SIG7730 module programming is carried out in  consecutive steps:
1. using the universal TPE programmer, to select mainly the network parameter (IP, NETMASK, GA-
TEWAY, etc) refer to the user's instructions of the universal programmer and the SIG7730 GENERAL
MENU;
01
HEAD-Line
Freq. In 1204
Lev Out 15
FRACARRO
2. though the local connection between the module and PC. To carry out the local connection to
the module and enter all the configurations through the integrated web-browser interface, use a PC
with a network adapter (Ethernet card) and an Ethernet CAT-5E crossover cable – refer to the PRO-
GRAMMING INSTRUCTIONS – SIG7730 WEB MANAGEMENT PROCEDURE).
01
HEAD-Line

5. PROGRAMMING INSTRUCTIONS

BLV4F
MBJ2320
V
SIG7901
SIG7730
BLV4F
MBJ2320
V
SIG7901
HEAD-Line
9
BLU420F
BLU420F
20BL45F
U
KPR41
SAT SAT SAT SAT SAT SAT
SIG7730 SIG7730 SIG7730 SIG7730 SIG7730 SIG7730
HEAD-Line HEAD-Line HEAD-Line HEAD-Line HEAD-Line HEAD-Line
IP IP IP IP IP IP
BLU420F
BLU420F
20BL45F
U
KPR41
SAT SAT SAT SAT SAT SAT
SIG7730 SIG7730 SIG7730 SIG7730 SIG7730 SIG7730
HEAD-Line HEAD-Line HEAD-Line HEAD-Line HEAD-Line
IP IP IP IP IP IP
SIG7730
PC