Starmix GS 2078 Notice D'utilisation page 10

LIQUID SUCTION / OPERATING INSTRUCTION
– Remove the cloth filter bag (Fig. 2)
– Assembly the head on tank and block it by hooks (Fig. 3)
– Connect the flexible hose to the inlet (Fig. 4)
– Connect the extension to other side of flexible hose
(Fig. 5)
– Connect the wet tool (Fig. 6)
– Connect the plug to power socket then switch on the
equipment (Fig.7)
– Example of use of wet tool (Fig. 11)
USE OF OPTIONAL ACCESSORIES
– Example of use of carpet tool (Fig. 13).
MAINTENANCE
1. Always remove the plug from the current socket before
undertaking any type of intervention on the apparatus or
if it is left unattended or within children or people's reach
not quite conscious of their own actions.
2. Regularly control the feeding cable looking for damages,
cracks or ageing. Substitute the cable before using it
further.
3. If the feeding cable is damaged it must be substituted by
the manufacturer or by its after sales service or in any
case by a similarly qualified person, thus preventing any
possible risk.
4. When using extension electric wires ensure that they are
lying on dry surfaces and protected against possible water
jets.
5. Specialized personnel must always carry out maintenance
and repairs; any damaged part must be substituted with
original spare parts.
10
ATTENTION: it is forbidden to carry out changes to the
apparatus. Tampering could cause fires and damages
even lethal to the user and the forfeiture of the
guarantee.
The manufacturer declines any responsibility for damages
caused to people or things due to non-compliance with
these instructions or if the apparatus is unreasonably
used.
Do not dispose of power tools into household
waste!
According to the European Directive 2002/96
EC on waste electrical and electronic equip-
ment (WEEE) and its incorporation into
national law, power tools that are no longer suitable for
use must be separately collected and sent for recovery in
an environmental- friendly manner.