Amphenol 151221BF Manuel D'utilisation page 35

Title : Amphenol RET User Guide
Titre : Manuel d'utilisation des RET Amphenol
Reference : User Guide
0x21 Working Software
Missing
0x22 Invalid File Content
0x24 Format Error
0x25 Unsupported
Procedure
0x26 Invalid Procedure
Sequence
•
In response to a Get Device Data if the parameter is
unknown.
•
When the download of new firmware is in progress
•
The downloaded file is incorrect
•
The checksum of the configuration data file is
incorrect
•
The configuration data file is corrupted (either too
many or not enough values, bad voltage values, bad
vendor code)
•
During a download, there is problem writing a flash
segment or a problem with checksum
•
The length of the frame is incorrect
•
During a Set Device Data, the data size is incorrect
•
Alarm sent when a specific vendor command is sent
•
You do not have the right to access this command
•
A command related to download is sent when the RET
is not in Download State
151221BF
•
Wait for the download
•
Request the latest version of firmware from
Amphenol
•
Request the latest version for the configuration
data file for your antenna from Amphenol
•
Inform the Amphenol R&D
technical.support.ret@amphenol-antennas.com
•
Inform the Amphenol R&D
technical.support.ret@amphenol-antennas.com
•
Inform the Amphenol R&D
technical.support.ret@amphenol-antennas.com
Page 35 sur 69