Transmitter Battery Installation; System Connection - Ibiza sound UHF10A/B Manuel D'utilisation

DUAL CHANNEL RECEIVER
1. Volume knob: To adjust the volume of the receiver
2. Display
3. "AF" audio level indicator: Shows the wireless system audio signal level
4. "RF" signal indicator: Glows when the receiver receives an RF signal from the transmitter.
5. Power switch: Powers the receiver ON & OFF.
6. Antenna A/B
7. XLR balanced output jack: Connect the audio cable from this jack to the input port of an amplifier, mixer.
8. 6.35mm audio output jack: Connect the audio cable from this jack to the input port of an amplifier, mixer, etc.
9. Power jack: Connect the AC/DC adaptor to the receiver.
MICROPHONE TRANSMITTER FEATURES
1. Grille: Protects the cartridge and helps reducing the breath sounds and
wind noise.
2. Battery cover: Open it to install the battery
3. Low battery indicator: Red light glows when the battery voltage gets
low and the battery needs to be replaced.
4. Power and Audio Mute switch.

TRANSMITTER BATTERY INSTALLATION

Push the battery cover open. Insert the supplied batteries into
the battery compartment with the correct polarity. Close the
battery cover.

SYSTEM CONNECTION

1. Receiver power connection: Connect the DC connector of
the supplied AC/DC adaptor to the DC input socket on the
receiver. Plug the AC connector into an appropriate mains
outlet (see illustration).