Remote Air Temperature Sensor; Electric Box - Gree GRS-CQ8.0Pd/NaE-K Manuel D'utilisateur

SPLIT TYPE

9. Remote Air Temperature Sensor

CN15
Notes
(a) Distance between the indoor unit and the remote air temperature sensor should be less than 15m due to
length of the connection cable of remote air temperature sensor;
(b) Height from floor is approximately 1.5m;
(c) Remote air temperature sensor cannot be located where the area may be hidden when door is open;
(d) Remote air temperature sensor cannot be located where external thermal influence may be applied;
(e) Remote air temperature sensor should be installed where space heating is mainly applied;
(f) After the remote air temperature sensor is installed, it should be set to "With" through the wired controller so
as to set the remote air temperature to the control point.
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
Front side
PCB

Electric box

Air-to-water Heat Pump Split Versati
Back side
Remote Air Environment
Temp sensor
15K
CN1
2
29
RT6
AP