Preparing The Opening - GE JGP628 Instructions D'installation

PrePArInG THe oPenInG
1 MAInTAIn THe foLLoWInG
MInIMuM CLeArAnCe
DIMenSIonS
13" MAX. Depth of unprotected
overhead cabinets
30" MIN. clearance from countertop
to unprotected overhead surface
3-3/4" MIN. clearance from
cutout to side wall on the
left of the unit
NOTE: All gas cooktop models require 7/16"
free area below cooktop height to combustible
material.
2 overALL CooKToP DIMenSIonS
36"
Cooktop
18-7/8"
3 CuTouT DIMenSIonS of
CounTerToP
To ensure accuracy, it is best to make
a template when cutting the opening
in the counter.
2-1/4" Min. Between
cutout and the wall
behind the cooktop
2-1/2" Min. from
front edge of cutout
and front edge of
countertop
Installation Instructions
6" MIN. clearance from
3 3/4 MIN.
cutout to side wall on the
right of the unit
18" MIN. height
from countertop to
nearest cabinet on
either side of unit
21" (21-1/4" Max. for
Glass Top models)
3"
33-11/16"
19-1/8" width cut
33-7/8"
16-15/16"
length
of cut
4 reCoMMenDeD GAS SuPPLY
LoCATIon froM BACKWALL
Recommended
gas supply
location
5 MAKe Sure WALL CoverInGS,
CounTerToP AnD CABIneTS
ArounD CooKToP CAn
WITHSTAnD HeAT (uP To 200°f)
GenerATeD BY CooKToP
Wall covering,
cabinets and
countertop must
withstand heat
up to 200°F
4
1" Min. From Backwall
From Cutout
Center Line