Maintenance; Decommissioning; Disclaimer - yingli solar YL185P-23b-PC Manuel D'installation Et De Sécurité

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

EN
10
6.

MaINTENaNCE

»
SHOCK HAZARD FROM ELECTRICALLY LIVE PARTS!
FIRE HAZARD!
POTENTIAL FALLING FROM ROOFS!
YGE recommends a yearly inspection of all PV systems performed by an installer. Special attention shall be paid to loose
or corroded electrical or mechanical connections and correct grounding.
Defects shall be repaired immediately.
»
YGE PV modules are designed to last for decades. In the unusual event a module has to be replaced, proceed identically
and with the same care as during the initial installation.
»
SHOCK HAZARD FROM ELECTRICALLY LIVE PARTS!
POTENTIAL FALLING FROM ROOFS!
Usually rain washes away the normal amount of dust and dirt from the modules from time to time. Unusual accumulations
of dust, dirt and other deposits can compromise the performance of a PV system significantly and should be removed.
Clean the modules with water and a soft sponge or brush.
Remaining deposits can be treated with a mild and non-alkaline detergent.
»
SHOCK HAZARD FROM ELECTRICALLY LIVE PARTS!
POTENTIAL FALLING FROM ROOFS!
YGE PV modules are designed to resist high snow- and wind-loads.
In some particular regions sometimes snow accumulates on top of the PV modules exposing them to breakage.
Remove the excess snow gently from the surface of the modules using a brush or broom.
Do not remove ice or frozen snow.
7.

dECoMMIssIoNING

»
SHOCK HAZARD FROM ELECTRICALLY LIVE PARTS!
FIRE HAZARD!
POTENTIAL FALLING FROM ROOFS!
Dismantling PV systems shall be performed with same care as the installation.
Apply the same safety precautions. Even after disconnection the DC system part is generating hazardous voltage.
Apply the applicable rules for work with live electrical equipment.
»
Ask YGE for options to properly dispose of or recycle modules.
8.

dIsCLaIMER

YGE does not assume responsibility and expressly disclaims liability for loss, damage, or expenses
arising out of, or in anyway connections with installation, operation use or maintenance by using this
manual. YGE assumes no responsibility for any infringement of patents or other rights of third parties,
which may result from using of the module. No license is granted by implication or under any patent or
patent rights. The information in this manual is believed to be reliable, but does not constitute an
expressed and implied warranty. YGE reserves the right to make changes to the product, specifications,
or manual without prior notice.
YGE and its subsidiaries and system installation partners are not liable for damages, caused by
inappropriate use and installation, especially without limitation by non-observance of the instructions
of this manual or caused in connection with products of other manufacturers.
This document is available in different languages. Please use the English version in case of
discrepancies in the other versions.

Publicité

Table des Matières
loading

Table des Matières