Accessories; Technical Data - Hilti DD 150-U Mode D'emploi

NOTE
Switching other machines or appliances on and off can cause undervoltage and/or overvoltage peaks which could
damage the machine. Never operate other machines from the generator/transformer at the same time.

3 Accessories

en
Designation
TPS theft protection system with
company card, company remote
and TPS‑K key
Water collection system (for use
with the drill stand)
Water collection system (for hand-
guided drilling)
Drill stand (with combination base
plate and tilt mechanism)
Drill stand with anchor base plate
Vacuum base plate
Depth gauge
Hand wheel (lever)
Hand wheel (star handle)
Core bit extension (BI+)
Jack screw
Rota-Rail (column swivel)

4 Technical data

Right of technical changes reserved.
NOTE
The machine is available in various voltage ratings. Please refer to the machine's type identification plate for details of
its rated voltage and rated input power.
Rated voltage [V]
Rated current [A]
Mains frequency [Hz]
Other information about the machine
Max. permissible water supply pressure
Drilling depth
Machine dimensions (L x W x H)
Drill stand dimensions (L x W x H)
Weight of machine
Weight of the DD-ST 150 drill stand with combination
base plate and carriage
Rated speed under no load
Protection class
6
Short designation
DD-ST-120/160-VBP
120
19.5
60
6 bar (87.02 psi)
450 mm
516 mm (20.31") x 129 mm (5.08") x 159 mm (6.26")
610 mm (24.02") x 250 mm (9.84") x 952 mm (37.48")
8.2 kg (18.08 lb)
13.3 kg (29.32 lb)
780 /min (1st gear), 1520 /min (2nd gear), 2850 /min
(3rd gear)
Protection class I (earthed)
Description
Option
127
18.5
50/60