Trouble Shooting - Electrolux ERT1000AOW Manuel D'utilisation

TROUBLE SHOOTING

Symptom
Appliance does not
work.
Appliance cools too
much.
The food is too
warm.
Interior lighting
does not work.
Heavy build-up of
frost, possibly also
on the door seal.
Unusual noises.
Possible Cause
Appliance is not switched
on.
Mains plug is not plugged in
or is loose.
Fuse has blown or is
defective.
Socket is defective.
Temperature is set too
cold.
Temperature is not properly
adjusted.
Door was open for an
extended period.
A large quantity of warm
food was placed in the
appliance within the last 24
hours.
The appliance is near a
heat source.
Light bulb is defective.
Door seal is not
air-tight(possibly after
reversing the door).
Appliance is not level.
The appliance is touching
the wall or other objects.
A component, e.g. a pipe,
on the rear of the appliance
is touching another part of
the appliance or the wall.
ENGLISH
Remedy
Switch on the appliance.
Insert mains plug.
Check fuse, replace if
necessary.
Mains malfunctions are to
be corrected by an electri-
cian.
Turn the temperature re-
gulator to a warmer setting
temporarily.
Please look in the «initial
Start Up» section.
Open the door only as long
as necessary.
Turn the temperature
regulation to a colder setting
temporarily.
Please look in the «installa-
tion location» section.
Please look in the «chan-
ging the Light Bulb» section.
Carefully warm the leaking
sections of the door seal
with a hair dryer(on a cool
setting). At the same time
shape the warmed door
seal by hand such that it sits
correctly.
Ρυθμίστε ξανά τα
ποδαράκια.
Μετακινήστε λίγο τη
συσκευή.
If necessary, carefully bend
the component out of the
way.
13