Display; Display Informations; Status Information; Energy Meter - Keba KeContact P20 Manuel De L'utilisateur

4

Display

Display (P30 option)
4.1

Display informations

Status information

When the device is started up, some information is displayed (software version, check total, counter status).

Energy meter

At the start and end, the value of the current charging session is shown on the display, marked with a "+".
Display
The optional dot matrix display (1) can display various
information depending on the operating state (e.g. soft-
ware version, energy meter status).
During periods of inactivity, the display brightness is
dimmed/switched off after a few minutes.
The dot matrix display shines through the housing and
is not visible when the display is deactivated!
en
25/200