ST Quadrat LUX-top SDA-Z II Manuel De Montage page 4

Installation Instructions
LUX-top SDA-Z II -
Anchoring point for the attachment of personal fall protection
systems
Preliminary note:
Prior to installation of the anchoring construction, the load capacity of the roof
construction must be checked. Please maintain the technical building regulations.
Only original parts of the anchoring system may be used. Note the installation and safety
information in the user instructions.
LUX – top
Fix the
the cross-lathe as shown in the following
installation sketch (or alternative directly
onto the reinforced concrete ceiling)
using the two
supplied.
Please also
instruction of the fixing elements
manufacturer!
NOTE: Please observe that the
LUX – top ®
SDA-Z II
so that it can be inserted into the
roof cladding structure
ST QUADRAT Fall Protection S.A. – Your competent partner for fall protection solutions – www.lux-top-absturzsicherungen.de
®
SDA–Z II through
concrete anchors M10
note the Installation
is positioned
.
CONCRETE
Depending on the dimensions of the roof
lathing, level differences are to be
balanced out
underneath (recommendation: Euroklick
Type 2).
Depending on the dimensions of
the roof lathing you have to
choose the matching concrete
Contact the manufacturer in
case of any uncertainty!
2
by inserting spacers
ATTENTION:
anchor size.
Version 04/2015