Storage - Carrera CRR MATCH-15 Mode D'emploi

Cleaning and oiling the cutting attachment
3. Apply several drops of oil to the cutting edge of the cut-
ting attachment. Using a soft cloth, wipe off the surplus
oil, if necessary. Only use acid-free oil, such as e.g. sewing
machine oil.
4. Press the cutting attachment carefully from the rear onto
the device until it locks into place.

8. stORaGe

DaNGeR!
remove the mains plug from the device. Do not wrap
the cable around the device (Danger! risk of cable
break!).
Keep the device in a dry, dust-free room.
Q
1. remove the cutting attachment from
the device by pressing it with the
thumb towards the rear (see figure).
2. remove the hair remnants from
the cutting attachment by using the
brush included in the delivery.
35