Thinning Hair - Carrera CRR MATCH-15 Mode D'emploi

Cutting hair
NOtes:
the hair to be dressed must be dry.
Q
the cutting length may deviate depending on the cutting
Q
angle.
First, start with a comb attachment for a longer cutting
Q
length and then, in the course of the cutting process, use
shorter cutting lengths step by step.
Comb the hair well.
Q
Place a sheet or cape around throat and neck to prevent
Q
cut-off hair from dropping into the collar.
Push the slide switch (2) to position "CUt".
Q
Start by cutting the hair in the neck or on the sides and cut
Q
towards the centre of the head. then, cut the front section
of the hair towards the centre of the head.
Hold the device such that the flat side of the comb attach-
Q
ment is in contact with the head. Move the device evenly
through the hair.
If possible, cut against direction of hair growth.
Q
In order to catch all the hair, move the device several
Q
times through each section of the hair.
Comb the hair repeatedly and well.
Q

thinning hair

Use the switch for the thinning function (2) – set to posi-
Q
tion "tHIN" – to reduce the volume of the hair without
changing its length.
33