System templates are displayed on the screen with the Txx prefix, where xx is the template
number (between 01 and 06), followed by its name or LABEL. These files are not rewritable.
User presets are displayed on the screen with the Pxx prefix, where xx is the preset number
(between 01 and 20), followed by its name or LABEL. The default name of all the user presets is USER
PRESET, but it can be modified when you save one of them in memory.
The procedure for recalling a preset or a user template is the following one:
From the main menu, press SHIFT + RECALL
The RECALL PRESET message is displayed and a preset number is flashing
[ P 0 4 ] S T E R E O
Select the preset or template using the rotary control, and then select one of the two
following options:
Press SHIFT + RECALL to validate the selection and activate the new preset,
returning to the main screen, this time with data from the new active preset
Or
Press SHIFT + CANCEL to cancel the selection and display again the preset from the
selection list
Pressing SHIFT + EXIT at any point during the above process cancels the selection and returns
the main screen.
6.4. SAVE PRESET MENU
Once you have edited the active preset or template, the procedure to save the current
configuration in a user preset memory is the following one:
From the main menu, press SHIFT + SAVE
The SAVE PRESET message is displayed and a preset number is flashing
[ P 0 7 ] S T E R E O
Select the user preset using the rotary control, and then select one of the two following
options:
Press SHIFT + SAVE to validate the selection
Or
Press SHIFT + CANCEL to cancel the selection and display again the preset from the
selection list
Pressing SHIFT + EXIT at any point during the above process cancels the selection and returns
the main screen.
If the selection is validated (SHIFT + SAVE) the following screen is displayed, allowing you to
rename the destination preset:
[ P 0 7 ] S T E R E O
14
R E C A L L
P R E S E T
S A V E
P R E S E T
R E N A M E
P R E S E T
3
W A Y
L I V E
3 W
L I V E
3 W