Philips S3000 Série Mode D'emploi page 18

18
English
4 Remove and clean one shaving head at a time.
Each shaving head consists of a cutter and a
guard.
Note: Do not clean more than one cutter and
guard at a time, since they are all matching sets.
If you accidentally mix up the cutters and
guards, it may take several weeks before
optimal shaving performance is restored.
5 Remove the cutter from the shaving guard and
clean both parts under the tap.
6 Put the cutter back into the guard.
7 Put the shaving heads back into the shaving
unit.