Table des Matières
Publicité
Installation and operation, Service
– With the CMC III Access Control, the two green and two red CAN bus LEDs on the CAN bus
connection will flash during the initialisation process. Once initialisation is complete, only the
EN
green LEDs will be illuminated.
– The multi-LED of the Processing Unit flashes continually in the green – orange – red sequence.
– The multi-LED on the Access Control flashes green continuously when the lever handle and door
are closed. Otherwise, the multi-LED flashes red.
– The multi-LED on the comfort handle displays a steady blue light when the lever handle and
door are closed.
– The multi-LED of the comfort handle shows a steady green light when the handle lever is en-
abled.
– The multi-LED of the comfort handle shows a steady amber light when the handle lever and/or
door are opened.
◾ Depending on the base system being used, confirm that the comfort handle is connected.
Display of the status change on the CAN bus LEDs of the Access Control:
– Green LEDs light continuously: CAN bus status "OK".
– Red LEDs light continuously: CAN bus status faulty.
Display of the status change on the multi-LED of the Processing Unit.
– Continuous green light: All units attached to the CAN bus have the "OK" status.
– Continuous orange light: At least one unit attached to the CAN bus has the "warning" status.
– Continuous red light: At least one unit attached to the CAN bus has the "alarm" status.
If the installation is not successful: see section 1.1.
5.3
Settings
"Access" mode is activated as standard for the comfort handle. The comfort handle is configured
under the Monitoring tab of the base system web interface.
More on this topic can be found in the main guide to the Access Control (DK 7030.202) at
www.rittal.com (see section 1.1).
To determine whether any software updates are required: see www.rittal.com or contact
Rittal Service (see section 6).
6
Service
For technical questions, please contact:
Tel.: +49 (0) 2772/505-9052
E-mail: info@rittal.de
Homepage: www.rittal.com
For complaints or service requests, please contact:
Tel.: +49 (0) 2772/505-1855
E-mail: service@rittal.de
12
Rittal CMC III online comfort handle VX
Publicité
Table des Matières
