Ramiaudio IMV600 Manuel De L'utilisateur page 38

ANNEX : TECHNICAL TOOLS
You have now a fixed IP address.
You can now access IMV600 (default IP address 192.168.0.60) using a web browser (ex : Firefox,
Internet explorer).
 If you use IMV600 as stand alone, you can now see the web pages, which will allow you to
configure your device.
When shipped from the factory, the IP address of the IMV600 is:
 If you use IMV600 in a network you use the following procedure:
In the web server "Configuration IP" menu, set an IP address in the available range in the final
network (network where IMV600 is used to be)
Example :
IP router : 192.168.1.1
IP IMV600 : 192.168.0.60
If the router net mask is 255.255.255.0, IMV600 IP will be out of range in this network.
Modify IMV600 IP address to one within the net (ex :
You can now connect IMV600 to the destination router.
The computer used for that procedure, is no more in the network. Think to restore original settings.
Open your web browser, enter IMV600 IP address, then validate.
http:// 192.168.1.60
You can now see the web pages, which will allow you to configure your device.
Rami
- Click "Use the following IP adress:" then fix the IP
address in the IMV600 network (ex 192.168.0.29).
- Click OK then OK.
192.168.1.60
38
http:// 192.168.0.60
)
Next
IMV600